Cam by cam cylinder, and the rack follower composed of three basic components of high-pair mechanism. Cylinder from the end cap, piston and cylinder components, driven by compressed air. the two institutions in the field of automation equipment, the use of very common advantages and disadvantages.
1. Cam design with aerodynamic body design of the machine than the machine is often much more complex, difficult to have much larger design, the machine can be designed independently cam is a master of mechanical design.
2. Using a machine cam cylinder body material cost than using the
machines to be low. Institutions have to use cylinder sensors, process controllers, electronic control complex and expensive.
3. Cam machine uses low cost, requiring only a power, it is usually used motor, high efficiency, low energy consumption. Machine using compressed air cylinder body or vacuum as the driving force, because the efficiency of the compressor or vacuum pump is too low, causing high energy consumption. The same functions machine, we use the two structures, respectively, when used in the production of cylinder, pneumatic 3KW need a compressor cylinder, while the use of cam mechanisms can only 0.55KW motor, a huge difference between the two energy
4. In contrast the use of noise is cam win.
5. In the life of the cam is only good material selection and processing, optimizing its life after a good exercise curve is very long, sealed gas cylinder problem exists, there is cumulative lifetime limit travel.
6. Cam mechanism to debug complex, indeed affect the body, the cylinder body can be independently controlled, independent adjustment.
7. Cylinder designed to be simple, we can say is that building blocks.
8. Cylinder structure, flexible, easy to adjust cam is truly a special machine.
Now in the connector assembly industry, customers tend to use cam pin machine, stability, use of low cost.
